PartsTable
Technical Data Sheet
Download PDF

241-20 ITEM 7 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

241-20 ITEM 7: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NEOPRENE OVERALL, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.125 INCHES NOMINAL IN, aperture_width: 6.813 INCHES NOMINAL IN, overall_length: 10.750 INCHES NOMINAL IN, aperture_length: 10.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-374-4523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
241-20 ITEM 7
NSN: 5330-01-374-4523
FSC: 5330 — Packing and Gasket Materials
CAGE: 73274 — HOSE-MCCANN TELEPHONE CO, INC (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.125 INCHES NOMINAL IN
aperture_width6.813 INCHES NOMINAL IN
overall_length10.750 INCHES NOMINAL IN
aperture_length10.438 INCHES NOMINAL IN
bolt_hole_quantity6
outside_corner_radius0.750 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
inside_corner_inverted_radius0.312 INCHES NOMINAL IN
NSN5330-01-374-4523
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 241-20 ITEM 7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
INSIDE CORNER INVERTED RADIUS: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 6.813 INCHES NOMINAL IN
•
APERTURE LENGTH: 10.438 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
INSIDE CORNER INVERTED RADIUS0.312 INCHES NOMINAL IN
OVERALL LENGTH10.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH7.125 INCHES NOMINAL IN
APERTURE WIDTH6.813 INCHES NOMINAL IN
APERTURE LENGTH10.438 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
OUTSIDE CORNER RADIUS0.750 INCHES NOMINAL IN
MATERIALRUBBER NEOPRENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
241-20 REV0 ITEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
241-20-7 REV0Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 241-20 ITEM 7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 241-20 ITEM 7?
241-20 ITEM 7 is a GASKET.
What parts can replace 241-20 ITEM 7?
There are 2 known substitutes for 241-20 ITEM 7: 241-20 REV0 ITE, 241-20-7 REV0. Substitute compatibility should be verified for your specific system.
What is the NSN for 241-20 ITEM 7?
241-20 ITEM 7 is cataloged in the U.S. Government catalog under NSN 5330-01-374-4523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 241-20 ITEM 7