PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2409-1173
2409-1173 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, outside_diameter: 6.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 5.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1841, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2409-1173
NSN: 5330-00-292-1841
FSC: 5330
CAGE: 63800 — WARNER AND SWASEY CO TURNING DIV (USA)
SPECIFICATIONS
materialLEATHER OVERALL
outside_diameter6.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter5.750 INCHES NOMINAL IN
cross-sectional_thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-292-1841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2409-1173 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: LEATHER OVERALL
•
APERTURE DIAMETER: 5.750 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIALLEATHER OVERALL
APERTURE DIAMETER5.750 INCHES NOMINAL IN
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2566-04Interchangeable
interchangeable cross-reference
interchangeable
3901321Interchangeable
interchangeable cross-reference
interchangeable
HDX125Interchangeable
interchangeable cross-reference
interchangeable
A579/7TTInterchangeable
interchangeable cross-reference
interchangeable
FLA7BX/SPX27Interchangeable
interchangeable cross-reference
interchangeable
BC-PL7/27/EMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2409-1173?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2409-1173?
2409-1173 is a GASKET.
What parts can replace 2409-1173?
There are 8 known substitutes for 2409-1173: 2566-04, 3901321, HDX125 and 5 more. Substitute compatibility should be verified for your specific system.
Is 2409-1173 still available?
2409-1173 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2409-1173

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026