PartsTable
Technical Data Sheet
Download PDF

2407T63 — CASTER,RIGID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2407T63: CASTER,RIGID.

The CASTER,RIGID is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM TIRE, wheel_type: SOLID, plate_style: RECTANGULAR, tread_width: 1.125 INCHES NOMINAL IN, wheel_diameter: 2.500 INCHES NOMINAL IN, effective_height: 3.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-322-7388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2407T63
NSN: 5340-01-322-7388
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM TIRE
wheel_typeSOLID
plate_styleRECTANGULAR
tread_width1.125 INCHES NOMINAL IN
wheel_diameter2.500 INCHES NOMINAL IN
wheel_quantity1
effective_height3.250 INCHES NOMINAL IN
style_designatorRIGID
surface_treatmentZINC PLATE
caster_plate_width2.250 INCHES NOMINAL IN
wheel_bearing_typeROLLER
caster_plate_length4.440 INCHES NOMINAL IN
NSN5340-01-322-7388
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2407T63 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE STYLE: RECTANGULAR
•
TREAD WIDTH: 1.125 INCHES NOMINAL IN
•
WHEEL TYPE: SOLID
•
STYLE DESIGNATOR: RIGID
•
CASTER PLATE MOUNTING HOLE DIAMETER: 0.385 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
•
CASTER PLATE WIDTH: 2.250 INCHES NOMINAL IN
•
CASTER PLATE LENGTH: 4.440 INCHES NOMINAL IN
•
WHEEL QUANTITY: 1
TECHNICAL CHARACTERISTICS
PLATE STYLERECTANGULAR
TREAD WIDTH1.125 INCHES NOMINAL IN
WHEEL TYPESOLID
STYLE DESIGNATORRIGID
CASTER PLATE MOUNTING HOLE DIAMETER0.385 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
CASTER PLATE WIDTH2.250 INCHES NOMINAL IN
CASTER PLATE LENGTH4.440 INCHES NOMINAL IN
WHEEL QUANTITY1
EFFECTIVE HEIGHT3.250 INCHES NOMINAL IN
SAFE OPERATING LOAD RATING200.0 POUNDS MAXIMUM LBS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
84000995-002Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2407T63?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2407T63?
2407T63 is a CASTER,RIGID.
What parts can replace 2407T63?
There is 1 known substitute for 2407T63: 84000995-002. Substitute compatibility should be verified for your specific system.
What is the NSN for 2407T63?
2407T63 is cataloged in the U.S. Government catalog under NSN 5340-01-322-7388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2407T63

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.