PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24057NREVAPC24
24057NREVAPC24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 1.625 INCHES NOMINAL IN, center_hole_diameter: 1.250 INCHES NOMINAL IN, cross-sectional_height: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-008-6829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24057NREVAPC24
NSN: 5330-01-008-6829
FSC: 5330
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
peripheral_diameter1.625 INCHES NOMINAL IN
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES NOMINAL IN
NSN5330-01-008-6829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24057NREVAPC24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.250 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.625 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
60-8-30Interchangeable
interchangeable cross-reference
interchangeable
A-A-2670 TY2SZ7Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-20 TY2SZ8Interchangeable
interchangeable cross-reference
interchangeable
XM36460-29-3000-W-LInterchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
21194Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24057NREVAPC24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24057NREVAPC24?
24057NREVAPC24 is a PACKING,PREFORMED.
What parts can replace 24057NREVAPC24?
There are 9 known substitutes for 24057NREVAPC24: 60-8-30, A-A-2670 TY2SZ7, GGG-T-20 TY2SZ8 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24057NREVAPC24?
24057NREVAPC24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-008-6829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24057NREVAPC24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026