PartsTable
Technical Data Sheet
Download PDF

240559 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

240559: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.073 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.510 INCHES NOMINAL IN, thread_length: 0.406 INCHES NOMINAL IN, screw_material: STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-186-1215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
240559
NSN: 5305-01-186-1215
FSC: 5305 — Screws
CAGE: 09205 — LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.073 INCHES NOMINAL IN
thread_class3A A
head_diameter0.510 INCHES NOMINAL IN
thread_length0.406 INCHES NOMINAL IN
screw_materialSTEEL COMP 8740
fastener_length0.594 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
features_providedWASHER AND O RING
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-186-1215
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 240559 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.073 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.594 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.406 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FEATURES PROVIDED: WASHER AND O RING
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.073 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.594 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.406 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDWASHER AND O RING
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8740
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
240559-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 240559?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 240559?
240559 is a SCREW,MACHINE.
What parts can replace 240559?
There is 1 known substitute for 240559: 240559-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 240559?
240559 is cataloged in the U.S. Government catalog under NSN 5305-01-186-1215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 240559