PartsTable
Technical Data Sheet
Download PDF

24041-8950 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24041-8950: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT DEGF, housing_bore_diameter: 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.685 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-702-9282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24041-8950
NSN: 5330-00-702-9282
FSC: 5330 — Packing and Gasket Materials
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT DEGF
housing_bore_diameter1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
accommodated_shaft_diameter0.685 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN
NSN5330-00-702-9282
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24041-8950 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.685 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT DEGF
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.685 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
358277Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 24041-8950?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24041-8950?
24041-8950 is a SEAL,PLAIN ENCASED.
What parts can replace 24041-8950?
There is 1 known substitute for 24041-8950: 358277. Substitute compatibility should be verified for your specific system.
What is the NSN for 24041-8950?
24041-8950 is cataloged in the U.S. Government catalog under NSN 5330-00-702-9282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24041-8950

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.