PartsTable
Technical Data Sheet
Download PDF

240385 — 240385

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

240385: 240385.

The 240385 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CORE CONDUCTOR ALL CONDUCTORS, electrical_resistance: 98.0 OHMS IMPEDANCE, cross-sectional_shape_style: ROUND, cross_section_outside_diameter: 0.180 INCHES NOMINAL IN, nominal_capacitance_in_picofarads: 16.5 PER FOOT. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-882-7332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 240385
NSN: 5330-00-882-7332
NIINs: 008827332, 013024913
FSC: 5330 — Packing and Gasket Materials
CAGE: 73160 — FEDERAL-MOGUL CORP POWERTRAIN PRODUCTS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY CORE CONDUCTOR ALL CONDUCTORS
conductor_quantity2
electrical_resistance98.0 OHMS IMPEDANCE
cross-sectional_shape_styleROUND
cross_section_outside_diameter0.180 INCHES NOMINAL IN
nominal_capacitance_in_picofarads16.5 PER FOOT
NSN5330-00-882-7332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 240385 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 0.758 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
HOUSING BORE DIAMETER0.758 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 1
10068333Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 240385?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 240385?
240385 is a 240385. It is classified as a MRO (MRO_GENERAL).
What parts can replace 240385?
There is 1 known substitute for 240385: 10068333. Substitute compatibility should be verified for your specific system.
What is the NSN for 240385?
240385 is cataloged in the U.S. Government catalog under NSN 5330-00-882-7332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 240385