PartsTable
Technical Data Sheet
Download PDF

24000461 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24000461: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 2.500 INCHES NOMINAL IN, knuckle_type: FRICTION, performance_type: NOT RATED, pin_removability: NONREMOVABLE, style_designator: BUTT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-274-2998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24000461
NSN: 5340-01-274-2998
FSC: 5340 — Hardware, Commercial
CAGE: 24995 — BECKLIN HOLDINGS, INC. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width2.500 INCHES NOMINAL IN
knuckle_typeFRICTION
knuckle_quantity2
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
material_thickness0.074 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.191 INCHES NOMINAL IN
NSN5340-01-274-2998
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24000461 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
REVERSIBLE FEATURE: NOT INCLUDED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
BODY WIDTH: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.191 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.875 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
REVERSIBLE FEATURENOT INCLUDED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
BODY WIDTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.191 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.875 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.074 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
C7417525C125-250Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 24000461?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24000461?
24000461 is a HINGE,BUTT.
What parts can replace 24000461?
There is 1 known substitute for 24000461: C7417525C125-250. Substitute compatibility should be verified for your specific system.
What is the NSN for 24000461?
24000461 is cataloged in the U.S. Government catalog under NSN 5340-01-274-2998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24000461

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.