PartsTable
Technical Data Sheet
PartsTable / MRO / 240-044
240-044 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CASE,ELECTRONIC COMMUNICATIONS E. Key specifications include length: 226.0 MILLIMETERS NOMINAL MM, body_length: 1.530 INCHES NOMINAL IN, body_material: METAL, hole_quantity: 12, inclosure_type: ENCASED, overall_length: 4.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-073-5310, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 240-044
NSN: 5330-00-073-5310
FSC: 5330
CAGE: 56043 — HYDRO-TEST PRODUCTS, INC. DBA HYDRO-TEST PRODUCTS INC (USA)
SPECIFICATIONS
length226.0 MILLIMETERS NOMINAL MM
body_length1.530 INCHES NOMINAL IN
body_materialMETAL
hole_quantity12
inclosure_typeENCASED
overall_length4.750 INCHES NOMINAL IN
special_features4.5 MM LCP PROXIMAL TIBIA PLATE; 12 HOLES; LENGTH: 226 MM; RIGHT; END ITEM: PLATE SET, BONE, COMPRESSION, NSN 6515-01-584-1100 MM
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
operating_temp_range-40.0 TO 85.0 CELSIUS DEGC
body_outside_diameter0.312 INCHES NOMINAL IN
end_item_identification6515-01-584-1100 PLATE SET, BONE, COMPRESSION
reference_frequency_per_function455.0 KILOHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-073-5310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 240-044 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONRECHARGING UNIT,CARBON DIOXIDE,MODEL SC-5,P/N 400147
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
TL-40D55AInterchangeable
interchangeable cross-reference
interchangeable
44266-1Interchangeable
interchangeable cross-reference
interchangeable
4730002033175Interchangeable
interchangeable cross-reference
interchangeable
E1X-68717Interchangeable
interchangeable cross-reference
interchangeable
687-17Interchangeable
Type,17
interchangeable
F4DDC1FS171Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 240-044?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 240-044?
240-044 is a CASE,ELECTRONIC COMMUNICATIONS E. It is classified as a MRO (MRO_GENERAL).
What parts can replace 240-044?
There are 13 known substitutes for 240-044: TL-40D55A, 44266-1, 4730002033175 and 10 more. Substitute compatibility should be verified for your specific system.
Is 240-044 still available?
240-044 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 240-044

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026