PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24-C463-9
24-C463-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC AND PLASTIC MELAMINE AND PAPER OVERALL, joint_type: BUTT PACKING, peripheral_diameter: 4.250 INCHES NOMINAL IN, center_hole_diameter: 4.125 INCHES NOMINAL IN, cross-sectional_height: 0.363 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-367-6772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24-C463-9
NSN: 5330-01-367-6772
FSC: 5330
CAGE: 28953 — RIX INDUSTRIES (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC AND PLASTIC MELAMINE AND PAPER OVERALL
joint_typeBUTT PACKING
peripheral_diameter4.250 INCHES NOMINAL IN
center_hole_diameter4.125 INCHES NOMINAL IN
cross-sectional_height0.363 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMICARTA TYPE HY 180-1 MFR REF ALL MATERIAL RESPONSES OVERALL
NSN5330-01-367-6772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24-C463-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.363 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC PHENOLIC AND PLASTIC MELAMINE AND PAPER OVERALL
•
JOINT TYPE: BUTT PACKING
•
PERIPHERAL DIAMETER: 4.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MICARTA TYPE HY 180-1 MFR REF ALL MATERIAL RESPONSES OVERALL
•
CENTER HOLE DIAMETER: 4.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.363 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
MATERIALPLASTIC PHENOLIC AND PLASTIC MELAMINE AND PAPER OVERALL
JOINT TYPEBUTT PACKING
PERIPHERAL DIAMETER4.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMICARTA TYPE HY 180-1 MFR REF ALL MATERIAL RESPONSES OVERALL
CENTER HOLE DIAMETER4.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
YAV10L63Interchangeable
interchangeable cross-reference
interchangeable
MILE16366Interchangeable
interchangeable cross-reference
interchangeable
C463Interchangeable
interchangeable cross-reference
interchangeable
S2119Interchangeable
interchangeable cross-reference
interchangeable
214-4501-799135ALT1PCF70BAGInterchangeable
interchangeable cross-reference
interchangeable
3201CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24-C463-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24-C463-9?
24-C463-9 is a PACKING,PREFORMED.
What parts can replace 24-C463-9?
There are 6 known substitutes for 24-C463-9: YAV10L63, MILE16366, C463 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24-C463-9?
24-C463-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-367-6772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24-C463-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026