PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24-80016
24-80016 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-2811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24-80016
NSN: 5340-00-194-2811
FSC: 5340
CAGE: 66463 — DIAMOND COMMUNICATION PRODUCTS INC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.080 INCHES NOMINAL IN
mounting_hole_size0.281 INCHES NOMINAL IN
inside_diameter/arch_length1.000 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.000 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole1.172 INCHES NOMINAL IN
NSN5340-00-194-2811
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24-80016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: ZINC
•
MOUNTING HOLE SIZE: 0.281 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 1.172 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
MATERIAL THICKNESS: 0.080 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTZINC
OVERALL LENGTH2.500 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.281 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.172 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.000 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
2AUpgraded Successor
successor cross-reference
successor
JUBILEE2AUpgraded Successor
successor cross-reference
successor
99-6044089Upgraded Successor
successor cross-reference
successor
GP525A7AUpgraded Successor
successor cross-reference
successor
S8-218101Upgraded Successor
successor cross-reference
successor
218101Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24-80016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24-80016?
24-80016 is a STRAP,RETAINING.
What parts can replace 24-80016?
There are 25 known substitutes for 24-80016: 2A, JUBILEE2A, 99-6044089 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24-80016?
24-80016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-2811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24-80016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026