PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24-80011
24-80011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 1.938 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-2814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24-80011
NSN: 5340-00-194-2814
FSC: 5340
CAGE: 72629 — GENERAL CABLE CO DIV OF GK TECHNOLOGIES INC DIAMOND EXPANSION BOLT CO DIV (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.625 INCHES NOMINAL IN
overall_length1.938 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.062 INCHES NOMINAL IN
mounting_hole_size0.281 INCHES NOMINAL IN
inside_diameter/arch_length0.656 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.656 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.891 INCHES NOMINAL IN
NSN5340-00-194-2814
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24-80011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: ZINC
•
STYLE DESIGNATOR: CURVED ARCH
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.891 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING PADNOT INCLUDED
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTZINC
STYLE DESIGNATORCURVED ARCH
OVERALL WIDTH0.625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.891 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.656 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.281 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.656 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2972-63ALT5PCF70Interchangeable
interchangeable cross-reference
interchangeable
1017A0030-1Interchangeable
interchangeable cross-reference
interchangeable
944-110PC23Interchangeable
interchangeable cross-reference
interchangeable
L-11Interchangeable
interchangeable cross-reference
interchangeable
111Interchangeable
interchangeable cross-reference
interchangeable
55-22119-67Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24-80011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24-80011?
24-80011 is a STRAP,RETAINING.
What parts can replace 24-80011?
There are 20 known substitutes for 24-80011: 2972-63ALT5PCF70, 1017A0030-1, 944-110PC23 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24-80011?
24-80011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-2814. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24-80011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026