PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23BR237112
23BR237112 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.378 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.374 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-1346, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23BR237112
NSN: 5330-00-285-1346
FSC: 5330
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
outside_diameter2.378 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.374 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-285-1346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23BR237112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
OUTSIDE DIAMETER2.378 INCHES NOMINAL IN
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
13738Interchangeable
interchangeable cross-reference
interchangeable
CH-7402K3Interchangeable
interchangeable cross-reference
interchangeable
7402Interchangeable
interchangeable cross-reference
interchangeable
152023C-2Interchangeable
interchangeable cross-reference
interchangeable
689Interchangeable
interchangeable cross-reference
interchangeable
DD5276Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23BR237112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23BR237112?
23BR237112 is a SEAL,PLAIN ENCASED.
What parts can replace 23BR237112?
There are 26 known substitutes for 23BR237112: 13738, CH-7402K3, 7402 and 23 more. Substitute compatibility should be verified for your specific system.
Is 23BR237112 still available?
23BR237112 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23BR237112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026