PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23BH
23BH ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, slot_width: 0.438 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: OBLONG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-227-8698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23BH
NSN: 5340-00-227-8698
FSC: 5340
CAGE: 80425 — ANCHOR POST PRODUCTS INC OF CALIFORNIA SUB OF PPA INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL BAND
slot_width0.438 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeOBLONG
surface_treatmentZINC BAND
material_thickness0.125 INCHES NOMINAL IN
loop_inside_diameter2.875 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.812 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.250 INCHES NOMINAL IN
NSN5340-00-227-8698
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23BH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
•
LOOP INSIDE DIAMETER: 2.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
TONGUE HOLE TYPE: OBLONG
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.250 INCHES NOMINAL IN
•
SLOT WIDTH: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
LOOP INSIDE DIAMETER2.875 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
TONGUE HOLE TYPEOBLONG
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.250 INCHES NOMINAL IN
SLOT WIDTH0.438 INCHES NOMINAL IN
SLOT LENGTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
02304Upgraded Successor
successor cross-reference
successor
600AJJ4Interchangeable
interchangeable cross-reference
interchangeable
600A4GMFInterchangeable
interchangeable cross-reference
interchangeable
2ZK9404-26Interchangeable
interchangeable cross-reference
interchangeable
394Interchangeable
interchangeable cross-reference
interchangeable
1004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23BH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23BH?
23BH is a CLAMP,LOOP.
What parts can replace 23BH?
There are 6 known substitutes for 23BH: 02304, 600AJJ4, 600A4GMF and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23BH?
23BH is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-227-8698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23BH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026