PartsTable
Technical Data Sheet
Download PDF

23B16031 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

23B16031: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.180 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-235-6236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23B16031
NSN: 5340-00-235-6236
FSC: 5340 — Hardware, Commercial
CAGE: 70167 — AIR CRUISERS COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.500 INCHES NOMINAL IN
first_leg_length0.180 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width0.500 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
second_leg_length0.280 INCHES NOMINAL IN
fabrication_methodFORMED
first_leg_thickness0.031 INCHES NOMINAL IN
NSN5340-00-235-6236
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23B16031 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.031 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.280 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
CENTER SECTION WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.031 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH0.500 INCHES NOMINAL IN
SECOND LEG LENGTH0.280 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
CENTER SECTION WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ANGLE
FIRST LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 23B16031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23B16031?
23B16031 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 23B16031?
23B16031 is cataloged in the U.S. Government catalog under NSN 5340-00-235-6236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23B16031