PartsTable
Technical Data Sheet
PartsTable / MRO / 23946
23946 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.500 INCHES MAXIMUM IN, shaft_style: ROUND, shaft_length: 0.750 INCHES NOMINAL IN, thread_class: 3A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-100-7025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 23946
NSN: 5330-00-100-7025
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.500 INCHES MAXIMUM IN
shaft_styleROUND
shaft_length0.750 INCHES NOMINAL IN
thread_class3A A
actuator_typeSINGLE SHAFT
body_diameter0.505 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
shaft_diameter0.124 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
outside_diameter17.000 INCHES NOMINAL IN
NSN5330-00-100-7025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23946 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
23946Interchangeable
interchangeable cross-reference
interchangeable
2394694Interchangeable
interchangeable cross-reference
interchangeable
A2394694Interchangeable
interchangeable cross-reference
interchangeable
RV1-2-101Interchangeable
interchangeable cross-reference
interchangeable
RV 1/2-S101Interchangeable
interchangeable cross-reference
interchangeable
23B946Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23946?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23946?
23946 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 23946?
There are 8 known substitutes for 23946: 23946, 2394694, A2394694 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23946?
23946 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-100-7025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23946

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026