PartsTable
Technical Data Sheet
Download PDF

239065PC6 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

239065PC6: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE AND FIBER OVERALL, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.032 INCHES MINIMUM AND 4.092 INCHES MAXIMUM IN, aperture_width: 3.032 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN, overall_length: 4.345 INCHES MINIMUM AND 4.405 INCHES MAXIMUM IN, aperture_length: 3.345 INCHES MINIMUM AND 3.405 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-319-7303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
239065PC6
NSN: 5330-01-319-7303
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCELLULOSE AND FIBER OVERALL
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.032 INCHES MINIMUM AND 4.092 INCHES MAXIMUM IN
aperture_width3.032 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
overall_length4.345 INCHES MINIMUM AND 4.405 INCHES MAXIMUM IN
aperture_length3.345 INCHES MINIMUM AND 3.405 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity8
inside_corner_radius0.375 INCHES NOMINAL IN
outside_corner_radius0.875 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-319-7303
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 239065PC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-20085 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 3.032 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-20085 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.345 INCHES MINIMUM AND 4.405 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.032 INCHES MINIMUM AND 4.092 INCHES MAXIMUM IN
APERTURE WIDTH3.032 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
APERTURE LENGTH3.345 INCHES MINIMUM AND 3.405 INCHES MAXIMUM IN
BOLT HOLE QUANTITY8
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 239065PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 239065PC6?
239065PC6 is a GASKET.
What is the NSN for 239065PC6?
239065PC6 is cataloged in the U.S. Government catalog under NSN 5330-01-319-7303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 239065PC6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.