PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2380405
2380405 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.313 INCHES NOMINAL IN, overall_length: 0.813 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-958-1185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2380405
NSN: 5340-00-958-1185
FSC: 5340
CAGE: 72629 — GENERAL CABLE CO DIV OF GK TECHNOLOGIES INC DIAMOND EXPANSION BOLT CO DIV (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.313 INCHES NOMINAL IN
overall_length0.813 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.048 INCHES NOMINAL IN
mounting_hole_size0.141 INCHES NOMINAL IN
inside_diameter/arch_length0.375 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.344 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.421 INCHES NOMINAL IN
NSN5340-00-958-1185
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2380405 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.344 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.421 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCURVED ARCH
SURFACE TREATMENTZINC
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
OVERALL WIDTH0.313 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.344 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.421 INCHES NOMINAL IN
OVERALL LENGTH0.813 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10554038-5Interchangeable
interchangeable cross-reference
interchangeable
80405Interchangeable
interchangeable cross-reference
interchangeable
02172Interchangeable
interchangeable cross-reference
interchangeable
1219738-206Interchangeable
interchangeable cross-reference
interchangeable
98-2059-5Interchangeable
interchangeable cross-reference
interchangeable
28471Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2380405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2380405?
2380405 is a STRAP,RETAINING.
What parts can replace 2380405?
There are 6 known substitutes for 2380405: 10554038-5, 80405, 02172 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2380405?
2380405 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-958-1185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2380405

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026