PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 237G114
237G114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, housing_bore_diameter: 2.374 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-252-5736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
237G114
NSN: 5330-00-252-5736
FSC: 5330
CAGE: 35510 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
housing_bore_diameter2.374 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.438 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-252-5736
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 237G114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER SEALING ELEMENT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.438 INCHES NOMINAL IN
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.438 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.250 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
21272Interchangeable
interchangeable cross-reference
interchangeable
5006M72P1Interchangeable
interchangeable cross-reference
interchangeable
5110-00-243-2508Interchangeable
interchangeable cross-reference
interchangeable
472Interchangeable
interchangeable cross-reference
interchangeable
21272-001Interchangeable
interchangeable cross-reference
interchangeable
J-E3-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 237G114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 237G114?
237G114 is a SEAL,PLAIN ENCASED.
What parts can replace 237G114?
There are 7 known substitutes for 237G114: 21272, 5006M72P1, 5110-00-243-2508 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 237G114?
237G114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-252-5736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 237G114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026