PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2376-423
2376-423 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-195-6037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2376-423
NSN: 5340-01-195-6037
FSC: 5340
CAGE: 74006 — RELIANCE COMM/TEC CORP LORAIN PRODUCTS DIV (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.984 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.766 INCHES NOMINAL IN
NSN5340-01-195-6037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2376-423 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.766 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.984 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.766 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.984 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
63X714Interchangeable
interchangeable cross-reference
interchangeable
5330002866867Interchangeable
interchangeable cross-reference
interchangeable
65X714Interchangeable
interchangeable cross-reference
interchangeable
R807REVAIT22Interchangeable
interchangeable cross-reference
interchangeable
N128Interchangeable
interchangeable cross-reference
interchangeable
R809REVBIT1JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2376-423?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2376-423?
2376-423 is a CLAMP,LOOP.
What parts can replace 2376-423?
There are 6 known substitutes for 2376-423: 63X714, 5330002866867, 65X714 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2376-423?
2376-423 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-195-6037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2376-423

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026