237216: PACKING,VALVE.
The PACKING,VALVE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5305-00-637-6701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT CHAMFER |
| head_height | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| head_diameter | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| thread_length | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| screw_material | STEEL |
| fastener_length | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| hardness_rating | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| thread_direction | RIGHT-HAND |
| internal_drive_style | SLOT |
| nominal_thread_diameter | 0.190 INCHES IN |
| thread_quantity_per_inch | 32 |
| thread_series_designator | UNF |
| NSN | 5305-00-637-6701 |
| HEAD HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| THREAD LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.190 INCHES IN |
| HEAD STYLE | FLAT CHAMFER |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL |
| NONSTANDARD THREAD PITCH DIAMETER | +0.1645 TO 0.1667 INCHES IN |
| INTERNAL DRIVE STYLE | SLOT |