PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 237114
237114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHIFTER FORK,VEHICULAR is a the manufacturer industrial component. Key specifications include end_item_identification: 3810-01-144-4885. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
237114
NSN: 5330-00-292-1612
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
end_item_identification3810-01-144-4885
NSN5330-00-292-1612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 237114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 1.438 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER2.378 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.438 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
604-3-4Interchangeable
interchangeable cross-reference
interchangeable
A-1526Interchangeable
interchangeable cross-reference
interchangeable
W1146Interchangeable
interchangeable cross-reference
interchangeable
49306Interchangeable
interchangeable cross-reference
interchangeable
14282Interchangeable
interchangeable cross-reference
interchangeable
TA11477-00-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 237114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 237114?
237114 is a SHIFTER FORK,VEHICULAR.
What parts can replace 237114?
There are 20 known substitutes for 237114: 604-3-4, A-1526, W1146 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 237114?
237114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 237114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026