PartsTable
Technical Data Sheet
23657 ✓ Verified by PartsTable
Trust · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,SLIDE VALVE is a Trust industrial component. Key specifications include special_features: CHLORINE TEST KIT, LOW RANGE, 0-0.6, 0-3.0 MG/L F&T MG/L T, COLOR DISC; 100 TESTS PER KIT, part_name_assigned_by_controlling_agency: CHLORINE TEST KIT 100 TEST PER KIT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-067-9478, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23657
NSN: 5330-00-067-9478
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
special_featuresCHLORINE TEST KIT, LOW RANGE, 0-0.6, 0-3.0 MG/L F&T MG/L T, COLOR DISC; 100 TESTS PER KIT
part_name_assigned_by_controlling_agencyCHLORINE TEST KIT 100 TEST PER KIT
NSN5330-00-067-9478
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23657 MFR: Trust ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
MATERIAL: STEEL CASE
CASE STYLE: SQUARE
SEAL WIDTH: 0.375 INCHES NOMINAL IN
OUTSIDE DIAMETER: 3.130 INCHES NOMINAL IN
SURFACE TREATMENT: PASSIVATE CASE
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
CASE STYLESQUARE
SEAL WIDTH0.375 INCHES NOMINAL IN
OUTSIDE DIAMETER3.130 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE CASE
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER3.131 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2810417Interchangeable
interchangeable cross-reference
interchangeable
MS24566-1BInterchangeable
interchangeable cross-reference
interchangeable
23657Interchangeable
interchangeable cross-reference
interchangeable
106435Interchangeable
interchangeable cross-reference
interchangeable
100878Interchangeable
interchangeable cross-reference
interchangeable
150101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23657?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23657?
23657 is a PLUNGER,SLIDE VALVE manufactured by Trust.
What parts can replace 23657?
There are 12 known substitutes for 23657: 2810417, MS24566-1B, 23657 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23657?
23657 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-067-9478. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23657