PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2360-1117
2360-1117 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1970 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2360-1117
NSN: 3110-00-227-3038
FSC: 3110
CAGE: 94080 — AIRCO WELDING PRODUCTS DIV OF BOC GROUP INC CUTTING MACHINE DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1970 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresSELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter0.5000 INCHES NOMINAL IN
NSN3110-00-227-3038
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2360-1117 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SPECIAL FEATURESSELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
LOAD DIRECTIONRADIAL
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
0752134Interchangeable
interchangeable cross-reference
interchangeable
77-R-3Interchangeable
interchangeable cross-reference
interchangeable
40456-25Interchangeable
interchangeable cross-reference
interchangeable
33KDD5Interchangeable
interchangeable cross-reference
interchangeable
S3KDD5Interchangeable
interchangeable cross-reference
interchangeable
8585Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2360-1117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2360-1117?
2360-1117 is a BEARING,BALL,ANNULAR.
What parts can replace 2360-1117?
There are 15 known substitutes for 2360-1117: 0752134, 77-R-3, 40456-25 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2360-1117?
2360-1117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2360-1117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026