PartsTable
Technical Data Sheet
Download PDF

235A2300GDG01 — DEFLECTOR,DIRT AND LIQUID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

235A2300GDG01: DEFLECTOR,DIRT AND LIQUID.

The DEFLECTOR,DIRT AND LIQUID is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, thread_class: 2B, outside_diameter: 4.250 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, material_thickness: 0.500 INCHES NOMINAL IN, mounting_hole_type: THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-436-5549, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
235A2300GDG01
NSN: 5340-01-436-5549
FSC: 5340 — Hardware, Commercial
CAGE: 20019 — WARD LEONARD CT LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
thread_class2B
outside_diameter4.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
material_thickness0.500 INCHES NOMINAL IN
mounting_hole_typeTHREADED
mounting_hole_quantity2
thread_size_and_series/type_designator0.164-32 UNIFIED NATIONAL COARSE (UNC)
angle_between_centerlines_of_mounting_holes_in_deg90.0
NSN5340-01-436-5549
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 235A2300GDG01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG: 90.0
•
OUTSIDE DIAMETER: 4.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.500 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2B
•
MATERIAL: COPPER ALLOY
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.164-32 UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG90.0
OUTSIDE DIAMETER4.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2B
MATERIALCOPPER ALLOY
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.164-32 UNIFIED NATIONAL COARSE (UNC)
MOUNTING HOLE TYPETHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 235A2300GDG01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 235A2300GDG01?
235A2300GDG01 is a DEFLECTOR,DIRT AND LIQUID.
What is the NSN for 235A2300GDG01?
235A2300GDG01 is cataloged in the U.S. Government catalog under NSN 5340-01-436-5549. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 235A2300GDG01