PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2357062
2357062 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 10.000 INCHES NOMINAL IN, aperture_width: 7.875 INCHES NOMINAL IN, overall_length: 10.000 INCHES NOMINAL IN, aperture_length: 7.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-965-9299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2357062
NSN: 5330-00-965-9299
FSC: 5330
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width10.000 INCHES NOMINAL IN
aperture_width7.875 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL IN
aperture_length7.875 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorNON-CIRCULAR
bolt_hole_quantity20
fsc_application_dataRADAR SET,GROUND
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-965-9299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2357062 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: RADAR SET,GROUND
•
STYLE DESIGNATOR: NON-CIRCULAR
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATARADAR SET,GROUND
STYLE DESIGNATORNON-CIRCULAR
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
OVERALL LENGTH10.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.469 INCHES NOMINAL IN
OVERALL WIDTH10.000 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.469 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
102616Interchangeable
interchangeable cross-reference
interchangeable
FFS103TYPE3STYLE4Interchangeable
interchangeable cross-reference
interchangeable
2827Interchangeable
interchangeable cross-reference
interchangeable
MIL-W-16878/4Interchangeable
interchangeable cross-reference
interchangeable
MPD1506TYPEE20STW9Interchangeable
interchangeable cross-reference
interchangeable
22241 MFR:WALKEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2357062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2357062?
2357062 is a GASKET.
What parts can replace 2357062?
There are 9 known substitutes for 2357062: 102616, FFS103TYPE3STYLE4, 2827 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2357062?
2357062 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-965-9299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2357062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026