PartsTable
Technical Data Sheet
Download PDF

235614 — 235614

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

235614: 235614.

The 235614 is a the manufacturer industrial component. Key specifications include diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, material: STEEL COMP 410 BAND, overall_width: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-290-4197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 235614
NSN: 5340-00-290-4197
NIINs: 002904197, 014693551
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
materialSTEEL COMP 410 BAND
overall_width0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
loop_inside_diameter0.875 INCHES NOMINAL IN
material_document_and_classificationAMS5504 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.180 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
NSN5340-00-290-4197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 235614 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5504 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.180 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5504 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.180 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410 BAND
LOOP INSIDE DIAMETER0.875 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 235614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 235614?
235614 is a 235614. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 235614?
235614 is cataloged in the U.S. Government catalog under NSN 5340-00-290-4197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 235614

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.