PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 235-15-4
235-15-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MIXER,LIQUID,REVOLVING HEAD is a the manufacturer industrial component. Key specifications include special_features: 5 DASHER RODS, part_name_assigned_by_controlling_agency: MIXER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-680-5391, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
235-15-4
NSN: 5310-00-680-5391
FSC: 5310
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
special_features5 DASHER RODS
part_name_assigned_by_controlling_agencyMIXER
NSN5310-00-680-5391
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 235-15-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL COMP 1050 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.396 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL COMP 1050 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.396 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
GA3003Interchangeable
interchangeable cross-reference
interchangeable
2190-0084Interchangeable
interchangeable cross-reference
interchangeable
9573-1Interchangeable
interchangeable cross-reference
interchangeable
235154Interchangeable
interchangeable cross-reference
interchangeable
1214-05CDPLInterchangeable
Same NIIN cross-reference
interchangeable
1214-05-00-0543BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 235-15-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 235-15-4?
235-15-4 is a MIXER,LIQUID,REVOLVING HEAD.
What parts can replace 235-15-4?
There are 12 known substitutes for 235-15-4: GA3003, 2190-0084, 9573-1 and 9 more. Substitute compatibility should be verified for your specific system.
Is 235-15-4 still available?
235-15-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 235-15-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026