PartsTable
Technical Data Sheet

234A042-3/86 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

234A042-3/86: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 1.200 INCHES NOMINAL IN, special_features: FINISH IS ADHESIVE COATED, COLOR IS BLACK, style_designator: THRU-HOLE, body_outside_diameter: 0.420 INCHES NOMINAL IN, opening_inside_diameter: 0.680 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-411-9301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
234A042-3/86
NSN: 5340-01-411-9301
FSC: 5340 — Hardware, Commercial
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height1.200 INCHES NOMINAL IN
special_featuresFINISH IS ADHESIVE COATED, COLOR IS BLACK
style_designatorTHRU-HOLE
body_outside_diameter0.420 INCHES NOMINAL IN
opening_inside_diameter0.680 INCHES MINIMUM IN
NSN5340-01-411-9301
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 234A042-3/86 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.680 INCHES MINIMUM IN
•
BODY OUTSIDE DIAMETER: 0.420 INCHES NOMINAL IN
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.200 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.680 INCHES MINIMUM IN
BODY OUTSIDE DIAMETER0.420 INCHES NOMINAL IN
STYLE DESIGNATORTHRU-HOLE
SPECIAL FEATURESFINISH IS ADHESIVE COATED, COLOR IS BLACK
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 2
2041AS920-02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2041AS920Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 234A042-3/86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 234A042-3/86?
234A042-3/86 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 234A042-3/86?
There are 2 known substitutes for 234A042-3/86: 2041AS920-02, 2041AS920. Substitute compatibility should be verified for your specific system.
What is the NSN for 234A042-3/86?
234A042-3/86 is cataloged in the U.S. Government catalog under NSN 5340-01-411-9301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 234A042-3/86

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.