PartsTable
Technical Data Sheet

234A011-3S/2000 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

234A011-3S/2000: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 0.870 INCHES NOMINAL IN, style_designator: THRU-HOLE, body_outside_diameter: 0.620 INCHES MINIMUM IN, opening_inside_diameter: 0.350 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-410-7475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
234A011-3S/2000
NSN: 5340-01-410-7475
FSC: 5340 — Hardware, Commercial
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height0.870 INCHES NOMINAL IN
style_designatorTHRU-HOLE
body_outside_diameter0.620 INCHES MINIMUM IN
opening_inside_diameter0.350 INCHES MINIMUM IN
NSN5340-01-410-7475
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 234A011-3S/2000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.350 INCHES MINIMUM IN
•
BODY OUTSIDE DIAMETER: 0.620 INCHES MINIMUM IN
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.870 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.350 INCHES MINIMUM IN
BODY OUTSIDE DIAMETER0.620 INCHES MINIMUM IN
STYLE DESIGNATORTHRU-HOLE
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 3
10138444Reference document
Same NSN cross-reference
Reference document — Informative reference only
2037AS557-01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2037AS557Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 234A011-3S/2000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 234A011-3S/2000?
234A011-3S/2000 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 234A011-3S/2000?
There are 3 known substitutes for 234A011-3S/2000: 10138444, 2037AS557-01, 2037AS557. Substitute compatibility should be verified for your specific system.
What is the NSN for 234A011-3S/2000?
234A011-3S/2000 is cataloged in the U.S. Government catalog under NSN 5340-01-410-7475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 234A011-3S/2000