PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 234447R1
234447R1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.290 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 2.135 INCHES NOMINAL IN, special_features: COLORBLACK, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-236-9925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
234447R1
NSN: 5340-00-236-9925
FSC: 5340
CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
diameter0.290 INCHES NOMINAL IN
materialSTEEL BAND
overall_width2.135 INCHES NOMINAL IN
special_featuresCOLORBLACK
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPAINT BAND
material_thickness0.105 INCHES NOMINAL IN
loop_inside_diameter4.500 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end3.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.750 INCHES NOMINAL IN
NSN5340-00-236-9925
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 234447R1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.105 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL: STEEL BAND
•
SURFACE TREATMENT: PAINT BAND
•
DIAMETER: 0.290 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.105 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
MATERIALSTEEL BAND
SURFACE TREATMENTPAINT BAND
DIAMETER0.290 INCHES NOMINAL IN
OVERALL WIDTH2.135 INCHES NOMINAL IN
SPECIAL FEATURESCOLORBLACK
DISTANCE FROM LOOP CENTER TO TONGUE END3.250 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
10768Interchangeable
interchangeable cross-reference
interchangeable
1370-L108Interchangeable
interchangeable cross-reference
interchangeable
152068Interchangeable
interchangeable cross-reference
interchangeable
155872-3Interchangeable
interchangeable cross-reference
interchangeable
A16Interchangeable
interchangeable cross-reference
interchangeable
K7022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 234447R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 234447R1?
234447R1 is a CLAMP,LOOP.
What parts can replace 234447R1?
There are 16 known substitutes for 234447R1: 10768, 1370-L108, 152068 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 234447R1?
234447R1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-236-9925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 234447R1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026