PartsTable
Technical Data Sheet
Download PDF

233545 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

233545: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, overall_width: 0.9688 INCHES NOMINAL IN, outside_diameter: 4.1250 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.1250 INCHES NOMINAL IN, end_item_identification: 2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR); MRAP BUFFALO MK2A2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-142-4387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 233545
NSN: 3110-00-142-4387
NIINs: 001424387, 006869353
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0B103 — MERITOR SPECIALTY PRODUCTS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.9688 INCHES NOMINAL IN
outside_diameter4.1250 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.1250 INCHES NOMINAL IN
end_item_identification2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR); MRAP BUFFALO MK2A2
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-142-4387
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 233545 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 4.1250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.9688 INCHES NOMINAL IN
OUTSIDE DIAMETER4.1250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR); MRAP BUFFALO MK2A2
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
550426Reference document
Same NSN cross-reference
Reference document — Secondary reference
453XReference document
Same NSN cross-reference
Reference document — Secondary reference
50320R1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
280652Reference document
Same NSN cross-reference
Reference document — Secondary reference
742240Reference document
Same NSN cross-reference
Reference document — Secondary reference
149549Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 233545?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 233545?
233545 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 233545?
There are 9 known substitutes for 233545: 550426, 453X, 50320R1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 233545?
233545 is cataloged in the U.S. Government catalog under NSN 3110-00-142-4387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 233545

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.