PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 232824
232824 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHAFT,AXLE,AUTOMOTIVE is a the manufacturer industrial component. Key specifications include inclosure: INCLUDED, action_type: VIBRATING, overall_width: 2.812 INCHES NOMINAL IN, overall_height: 1.562 INCHES NOMINAL IN, overall_length: 3.750 INCHES NOMINAL IN, mounting_method: HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-687-3374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
232824
NSN: 5340-00-687-3374
FSC: 5340
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
inclosureINCLUDED
action_typeVIBRATING
overall_width2.812 INCHES NOMINAL IN
overall_height1.562 INCHES NOMINAL IN
overall_length3.750 INCHES NOMINAL IN
mounting_methodHOLE(S)
frequency_rating60.0 HERTZ NOMINAL
surface_treatmentPAINT
mounting_hole_diameter0.156 INCHES NOMINAL IN
mounting_hole_quantity2
environmental_protectionDUSTPROOF
voltage_in_volts_and_current_type115.0 AC
NSN5340-00-687-3374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 232824 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.906 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.656 INCHES NOMINAL IN
•
DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
OVERALL WIDTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.906 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.656 INCHES NOMINAL IN
DIAMETER0.281 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
11123Upgraded Successor
successor cross-reference
successor
94732PC32Interchangeable
interchangeable cross-reference
interchangeable
200KPPFS104Interchangeable
interchangeable cross-reference
interchangeable
99500X2100R5Interchangeable
interchangeable cross-reference
interchangeable
200PPFS381Interchangeable
interchangeable cross-reference
interchangeable
640101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 232824?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 232824?
232824 is a SHAFT,AXLE,AUTOMOTIVE.
What parts can replace 232824?
There are 22 known substitutes for 232824: 11123, 94732PC32, 200KPPFS104 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 232824?
232824 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-687-3374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 232824

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026