PartsTable / COMPONENT / 232823
232823
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-740-9401, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
232823
NSN: 5340-00-740-9401 FSC: 5340 CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
diameter 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN material STEEL BAND overall_width 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED surface_treatment CADMIUM BAND material_thickness 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN loop_inside_diameter 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN distance_from_loop_center_to_tongue_end 0.827 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN center_to_center_distance_between_loop_and_mounting_hole 0.577 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN NSN 5340-00-740-9401
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 232823
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DIAMETER: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
• MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
• SURFACE TREATMENT: CADMIUM BAND
• STYLE DESIGNATOR: SINGLE LOOP
• LOOP INSIDE DIAMETER: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER CUSHION DIAMETER 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN MATERIAL THICKNESS 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN SURFACE TREATMENT CADMIUM BAND STYLE DESIGNATOR SINGLE LOOP MATERIAL STEEL BAND OVERALL WIDTH 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN LOOP INSIDE DIAMETER 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.577 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.827 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1-1260 Interchangeable interchangeable cross-reference
interchangeable
202639 Interchangeable interchangeable cross-reference
interchangeable
2-429 Interchangeable interchangeable cross-reference
interchangeable
7409401 Interchangeable Same NIIN cross-reference
interchangeable
80546R1 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 232823?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 232823?
232823 is a CLAMP,LOOP.
What parts can replace 232823?
There are 5 known substitutes for 232823: 1-1260, 202639, 2-429 and 2 more. Substitute compatibility should be verified for your specific system.
Is 232823 still available?
232823 is currently cancelled.