PartsTable
Technical Data Sheet
PartsTable / MRO / 232091
232091 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.500 INCHES NOMINAL IN, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, body_diameter: 0.500 INCHES NOMINAL IN, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-470-7960, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 232091
NSN: 5331-00-470-7960
FSC: 5331 — O-RING
CAGE: 60848 — ALLIED SYSTEMS COMPANY DBA ALLIED SYSTEMS CO (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length1.500 INCHES NOMINAL IN
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
body_diameter0.500 INCHES NOMINAL IN
hardness_rating70.0 SHORE DUROMETER A NOMINAL
terminal_length1.750 INCHES MINIMUM IN
outside_diameter1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
terminal_diameter0.032 INCHES NOMINAL IN
center_hole_diameter1.106 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
reliability_indicatorNOT ESTABLISHED
NSN5331-00-470-7960
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 232091 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.106 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 331 MAXIMUM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.106 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE331 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
LU4-1-5Interchangeable
interchangeable cross-reference
interchangeable
73P223010Interchangeable
interchangeable cross-reference
interchangeable
232091Interchangeable
interchangeable cross-reference
interchangeable
748361Interchangeable
interchangeable cross-reference
interchangeable
AS568-232/M3CH714A25B34E016E036Interchangeable
interchangeable cross-reference
interchangeable
3002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 232091?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 232091?
232091 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 232091?
There are 18 known substitutes for 232091: LU4-1-5, 73P223010, 232091 and 15 more. Substitute compatibility should be verified for your specific system.
Is 232091 still available?
232091 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 232091

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026