PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2320-0063
2320-0063 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, thickness: 0.031 INCHES NOMINAL IN, hole_diameter: 0.135 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, overall_diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-057-5709, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2320-0063
NSN: 5330-00-057-5709
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
thickness0.031 INCHES NOMINAL IN
hole_diameter0.135 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
overall_diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-057-5709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2320-0063 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CENTER HOLE DIAMETER: 0.139 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CUT TYPE: DIAGONAL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CENTER HOLE DIAMETER0.139 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CUT TYPEDIAGONAL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
GK6845BInterchangeable
interchangeable cross-reference
interchangeable
6205-2ZJTEInterchangeable
interchangeable cross-reference
interchangeable
06771DD0FInterchangeable
interchangeable cross-reference
interchangeable
WWT725Interchangeable
interchangeable cross-reference
interchangeable
B16.22Interchangeable
interchangeable cross-reference
interchangeable
B1622Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2320-0063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2320-0063?
2320-0063 is a WASHER,FLAT.
What parts can replace 2320-0063?
There are 29 known substitutes for 2320-0063: GK6845B, 6205-2ZJTE, 06771DD0F and 26 more. Substitute compatibility should be verified for your specific system.
Is 2320-0063 still available?
2320-0063 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2320-0063

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026