PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 231H
231H ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TAPE,LACING AND TYING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include color: OLIVE DRAB, phase: SINGLE OUTPUT, length: 500.000 YARDS NOMINAL, material: COPPER ALLOY OVERALL, thickness: 0.011 INCHES NOMINAL IN, duty_cycle: CONTINUOUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-9193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
231H
NSN: 5310-00-275-9193
FSC: 5310
CAGE: 23515 — FREDERICK CUSTOM MACHINING INC (USA)
SPECIFICATIONS
colorOLIVE DRAB
phaseSINGLE OUTPUT
length500.000 YARDS NOMINAL
materialCOPPER ALLOY OVERALL
thickness0.011 INCHES NOMINAL IN
duty_cycleCONTINUOUS
temp_rating50.0 AMBIENT CELSIUS
current_typeDC INPUT
power_rating75.0000 WATTS OUTPUT
hole_diameter1.688 INCHES NOMINAL IN
overall_width0.065 INCHES NOMINAL IN
physical_formSPOOL
NSN5310-00-275-9193
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 231H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER DIAMETER: 2.0610 INCHES MINIMUM AND 2.0615 INCHES MAXIMUM IN
•
SHOULDER HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
HOLE DIAMETER: 1.688 INCHES NOMINAL IN
•
SURFACE FINISH: 32.0 MICROINCHES ALL SURFACES
•
OUTSIDE DIAMETER: 2.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SHOULDER DIAMETER2.0610 INCHES MINIMUM AND 2.0615 INCHES MAXIMUM IN
SHOULDER HEIGHT0.250 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
HOLE DIAMETER1.688 INCHES NOMINAL IN
SURFACE FINISH32.0 MICROINCHES ALL SURFACES
OUTSIDE DIAMETER2.281 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
23-1HInterchangeable
interchangeable cross-reference
interchangeable
MIL-T-43435Interchangeable
interchangeable cross-reference
interchangeable
AA52082-C-4-OLIVE DRABInterchangeable
interchangeable cross-reference
interchangeable
A-A-52082-C-4Interchangeable
interchangeable cross-reference
interchangeable
28460D PIECE 23Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 231H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 231H?
231H is a TAPE,LACING AND TYING.
What parts can replace 231H?
There are 5 known substitutes for 231H: 23-1H, MIL-T-43435, AA52082-C-4-OLIVE DRAB and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 231H?
231H is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-9193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 231H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026