2314-9127 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2314-9127: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN, center_hole_diameter: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-984-3772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2314-9127

NSN: 5331-00-984-3772
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
center_hole_diameter	0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
elongation_percentage	331 MAXIMUM
cross-sectional_height	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN	5331-00-984-3772

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 331 MAXIMUM

•

CENTER HOLE DIAMETER: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	331 MAXIMUM
CENTER HOLE DIAMETER	0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 7

3-912N674-7Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

C004-12Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

MS28775-912Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

3-12 N674-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

3-12N219-7Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ARP568-912MILP2 5732Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2314-9127?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2314-9127?

2314-9127 is a O-RING.

What parts can replace 2314-9127?

There are 7 known substitutes for 2314-9127: 3-912N674-7, C004-12, MS28775-912 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2314-9127?

2314-9127 is cataloged in the U.S. Government catalog under NSN 5331-00-984-3772. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2314-9127 — O-RING

Request a Quote — 2314-9127