PartsTable
Technical Data Sheet
Download PDF

23114 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
InLine · MRO · MRO_GENERAL
PRODUCT OVERVIEW

23114: MICROCIRCUIT,DIGITAL.

- Wall distance ca. 18mm - der Bildschirm nicht neigbar - for flat screens VESA 50, 75 oder 100mm - Color: black - max. 25kg.

Key specifications include material: STEEL OVERALL, head_height: 0.164 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.500 INCHES NOMINAL IN, fastener_length: 0.664 INCHES NOMINAL IN, hardness_rating: 43.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S. Government catalog under NSN 5315-00-244-8904, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 23114
NSN: 5315-00-244-8904
NIINs: 002448904, 002472751, 005227935, 005813856, 010447950, 010637898, 011527057, 011710987, 012109632, 014168630, 014175828, 015972298, 016761789
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 08645 — BRIGGS AND STRATTON CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.164 INCHES NOMINAL IN
thread_class3A A
thread_length0.500 INCHES NOMINAL IN
fastener_length0.664 INCHES NOMINAL IN
hardness_rating43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentBLACK CHEMICAL FINISH OVERALL
internal_drive_styleHEXAGON
end_item_identification4910-01-613-4708
nominal_thread_diameter8.0 MILLIMETERS MM
minimum_tensile_strength180000 POUNDS PER SQUARE INCH LBS
NSN5315-00-244-8904
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 23114 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.0925 INCHES MINIMUM AND 0.0955 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.875 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.0925 INCHES MINIMUM AND 0.0955 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.875 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 23114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23114?
23114 is a MICROCIRCUIT,DIGITAL manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 23114?
23114 is cataloged in the U.S. Government catalog under NSN 5315-00-244-8904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23114