PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 231110
231110 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE ASSEMBLY,TRANSMISSION is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: 4 SPEED CONTROL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-789-2311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
231110
NSN: 5340-00-789-2311
FSC: 5340
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
general_characteristics_item_description4 SPEED CONTROL
NSN5340-00-789-2311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 231110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.035 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.754 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL BAND
•
MATERIAL: STEEL BAND
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.0329 INCHES NOMINAL IN
•
DIAMETER: 0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END1.035 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.754 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL BAND
MATERIALSTEEL BAND
STYLE DESIGNATORMULTIPLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.0329 INCHES NOMINAL IN
DIAMETER0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
LOOP LENGTH0.644 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
231110Interchangeable
interchangeable cross-reference
interchangeable
217746Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 231110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 231110?
231110 is a VALVE ASSEMBLY,TRANSMISSION.
What parts can replace 231110?
There are 2 known substitutes for 231110: 231110, 217746. Substitute compatibility should be verified for your specific system.
What is the NSN for 231110?
231110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-789-2311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 231110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026