PartsTable
Technical Data Sheet
PartsTable / O-RING / 23111-99-0323
23111-99-0323 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.020 INCHES NOMINAL IN, center_hole_diameter: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-412-1156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23111-99-0323
NSN: 5331-00-412-1156
FSC: 5331 — O-RING
CAGE: D9448 — RHEINMETALL LANDSYSTEME GMBH (DEU)
SPECIFICATIONS
materialRUBBER
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter3.020 INCHES NOMINAL IN
center_hole_diameter2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
material_document_and_classification750 FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE
NSN5331-00-412-1156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23111-99-0323 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 3.020 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 750 FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
TEMP RATING-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER3.020 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION750 FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2-334E515-8Interchangeable
interchangeable cross-reference
interchangeable
AS568-334Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-413Interchangeable
interchangeable cross-reference
interchangeable
S7-19-10V70Interchangeable
interchangeable cross-reference
interchangeable
ASTM D200 GR M2BF714B34E014Interchangeable
interchangeable cross-reference
interchangeable
8334-366YInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23111-99-0323?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23111-99-0323?
23111-99-0323 is a O-RING.
What parts can replace 23111-99-0323?
There are 12 known substitutes for 23111-99-0323: 2-334E515-8, AS568-334, MIL-STD-413 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23111-99-0323?
23111-99-0323 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-412-1156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23111-99-0323

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026