PartsTable
Technical Data Sheet
Download PDF

231109 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

231109: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN, material: STEEL BAND, loop_width: 0.314 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN, loop_length: 0.644 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-812-1190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
231109
NSN: 5340-00-812-1190
FSC: 5340 — Hardware, Commercial
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
diameter0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
materialSTEEL BAND
loop_width0.314 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
loop_length0.644 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentNICKEL BAND
material_thickness0.0329 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.009 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.754 INCHES NOMINAL IN
NSN5340-00-812-1190
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 231109 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.314 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DIAMETER: 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0329 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.009 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.314 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
STYLE DESIGNATORMULTIPLE LOOP
DIAMETER0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.0329 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.009 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.754 INCHES NOMINAL IN
MATERIALSTEEL BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 231109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 231109?
231109 is a CLAMP,LOOP.
What is the NSN for 231109?
231109 is cataloged in the U.S. Government catalog under NSN 5340-00-812-1190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 231109

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.