2310162 — GASKET

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

2310162: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: FIBER OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.400 INCHES NOMINAL IN, aperture_width: 4.125 INCHES NOMINAL IN, overall_length: 10.250 INCHES NOMINAL IN, aperture_length: 9.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-080-0485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2310162

NSN: 5315-00-080-0485
NIINs: 000800485, 013208123
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: FB459 — EMBRAER AVIATION INTERNATIONAL (FRA)

SPECIFICATIONS

material	FIBER OVERALL
hole_diameter	0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width	5.400 INCHES NOMINAL IN
aperture_width	4.125 INCHES NOMINAL IN
overall_length	10.250 INCHES NOMINAL IN
aperture_length	9.000 INCHES NOMINAL IN
style_designator	NON-CIRCULAR
bolt_hole_quantity	4
inside_corner_radius	0.500 INCHES NOMINAL IN
outside_corner_radius	0.625 INCHES NOMINAL IN
cross-sectional_thickness	0.030 INCHES NOMINAL IN
cross-sectional_shape_style	SOLID SINGLE OR COMPOSITION
NSN	5315-00-080-0485

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.062 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 1.522 INCHES MINIMUM AND 1.542 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM

•

FIRST HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN

•

HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL

•

STYLE DESIGNATOR: STRAIGHT

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.062 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	1.522 INCHES MINIMUM AND 1.542 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
FIRST HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
HARDNESS RATING	26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

SUBSTITUTES & CROSS-REFERENCES 2

NASM5673Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS20392-2C45Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2310162?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2310162?

2310162 is a GASKET.

What parts can replace 2310162?

There are 2 known substitutes for 2310162: NASM5673, MS20392-2C45. Substitute compatibility should be verified for your specific system.

What is the NSN for 2310162?

2310162 is cataloged in the U.S. Government catalog under NSN 5315-00-080-0485. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2310162 — GASKET

Request a Quote — 2310162