PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 231-0382
231-0382 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, style_designator: TWO PIECE, material_diameter: 0.312 INCHES NOMINAL IN, loop_inside_diameter: 2.625 INCHES NOMINAL IN, integral_nut_type_and_quantity: 2 PLAIN U BOLT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-916-6528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
231-0382
NSN: 5340-00-916-6528
FSC: 5340
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialSTEEL BAND
style_designatorTWO PIECE
material_diameter0.312 INCHES NOMINAL IN
loop_inside_diameter2.625 INCHES NOMINAL IN
integral_nut_type_and_quantity2 PLAIN U BOLT
NSN5340-00-916-6528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 231-0382 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.312 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 2 PLAIN U BOLT
•
STYLE DESIGNATOR: TWO PIECE
•
LOOP INSIDE DIAMETER: 2.625 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DIAMETER0.312 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY2 PLAIN U BOLT
STYLE DESIGNATORTWO PIECE
LOOP INSIDE DIAMETER2.625 INCHES NOMINAL IN
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
35-23Upgraded Successor
successor cross-reference
successor
36-82Upgraded Successor
successor cross-reference
successor
D9484-59-7Interchangeable
interchangeable cross-reference
interchangeable
44615K422Interchangeable
interchangeable cross-reference
interchangeable
649201115Interchangeable
interchangeable cross-reference
interchangeable
368-0174-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 231-0382?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 231-0382?
231-0382 is a CLAMP,LOOP.
What parts can replace 231-0382?
There are 18 known substitutes for 231-0382: 35-23, 36-82, D9484-59-7 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 231-0382?
231-0382 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-916-6528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 231-0382

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026