PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 231-0341
231-0341 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, style_designator: TWO PIECE, material_thickness: 0.312 INCHES NOMINAL IN, loop_inside_diameter: 3.125 INCHES NOMINAL IN, integral_nut_type_and_quantity: 2 PLAIN U BOLT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-917-0917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
231-0341
NSN: 5340-00-917-0917
FSC: 5340
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialSTEEL BAND
style_designatorTWO PIECE
material_thickness0.312 INCHES NOMINAL IN
loop_inside_diameter3.125 INCHES NOMINAL IN
integral_nut_type_and_quantity2 PLAIN U BOLT
NSN5340-00-917-0917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 231-0341 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: TWO PIECE
•
MATERIAL: STEEL BAND
•
INTEGRAL NUT TYPE AND QUANTITY: 2 PLAIN U BOLT
•
MATERIAL THICKNESS: 0.312 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 3.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORTWO PIECE
MATERIALSTEEL BAND
INTEGRAL NUT TYPE AND QUANTITY2 PLAIN U BOLT
MATERIAL THICKNESS0.312 INCHES NOMINAL IN
LOOP INSIDE DIAMETER3.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
NAVY 1993 2296Upgraded Successor
successor cross-reference
successor
3522Upgraded Successor
successor cross-reference
successor
LLH377157Upgraded Successor
successor cross-reference
successor
831-63-811Interchangeable
interchangeable cross-reference
interchangeable
318M0007P001Interchangeable
interchangeable cross-reference
interchangeable
V2334XInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 231-0341?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 231-0341?
231-0341 is a CLAMP,LOOP.
What parts can replace 231-0341?
There are 13 known substitutes for 231-0341: NAVY 1993 2296, 3522, LLH377157 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 231-0341?
231-0341 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-917-0917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 231-0341

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026