PartsTable
Technical Data Sheet
Download PDF

23098-10-28-00 — BAND,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

23098-10-28-00: BAND,RETAINING.

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.700 INCHES NOMINAL IN, material: STEEL COMP 302, end_style: SOLID LOOP, thickness: 0.025 INCHES NOMINAL IN, loop_radius: 0.156 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-202-0096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23098-10-28-00
NSN: 5340-00-202-0096
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length0.700 INCHES NOMINAL IN
materialSTEEL COMP 302
end_styleSOLID LOOP
thickness0.025 INCHES NOMINAL IN
loop_radius0.156 INCHES NOMINAL IN
hole_diameter0.250 INCHES NOMINAL IN
basic_shape_styleFLAT
specification/standard_data81205-BACC10Q MANUFACTURERS SPECIFICATION
material_document_and_classificationMIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-202-0096
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23098-10-28-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.700 INCHES NOMINAL IN
•
END STYLE: SOLID LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOOP RADIUS: 0.156 INCHES NOMINAL IN
•
BASIC SHAPE STYLE: FLAT
•
SPECIFICATION/STANDARD DATA: 81205-BACC10Q MANUFACTURERS SPECIFICATION
•
WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.700 INCHES NOMINAL IN
END STYLESOLID LOOP
END STYLELOOP WITH TRUNNION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
LOOP RADIUS0.156 INCHES NOMINAL IN
BASIC SHAPE STYLEFLAT
SPECIFICATION/STANDARD DATA81205-BACC10Q MANUFACTURERS SPECIFICATION
WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 302
HOLE DIAMETER0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
BACC10Q10-28-00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BU122-4-28-00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12510-10-28-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23098-10-28-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23098-10-28-00?
23098-10-28-00 is a BAND,RETAINING.
What parts can replace 23098-10-28-00?
There are 3 known substitutes for 23098-10-28-00: BACC10Q10-28-00, BU122-4-28-00, 12510-10-28-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 23098-10-28-00?
23098-10-28-00 is cataloged in the U.S. Government catalog under NSN 5340-00-202-0096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23098-10-28-00

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.