PartsTable
Technical Data Sheet
Download PDF

2309480 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2309480: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.640 INCHES NOMINAL IN, housing_bore_diameter: 3.550 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-018-2233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2309480
NSN: 5330-00-018-2233
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT A
case_styleRECESSED
seal_width0.640 INCHES NOMINAL IN
housing_bore_diameter3.550 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter2.750 INCHES NOMINAL IN
NSN5330-00-018-2233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2309480 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.640 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 3.550 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT B
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.640 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER3.550 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT B
MATERIALRUBBER SEALING ELEMENT A
SUBSTITUTES & CROSS-REFERENCES 7
27297Reference document
Same NSN cross-reference
Reference document — Secondary reference
405367Reference document
Same NSN cross-reference
Reference document — Secondary reference
301177C91Reference document
Same NSN cross-reference
Reference document — Secondary reference
C1TT4478AReference document
Same NSN cross-reference
Reference document — Secondary reference
35322SReference document
Same NSN cross-reference
Reference document — Secondary reference
405367C91Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2309480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2309480?
2309480 is a SEAL,PLAIN ENCASED.
What parts can replace 2309480?
There are 7 known substitutes for 2309480: 27297, 405367, 301177C91 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2309480?
2309480 is cataloged in the U.S. Government catalog under NSN 5330-00-018-2233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2309480