23087585 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

23087585: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, diameter: 0.121 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, material: STEEL COMP 1095 OVERALL, head_width: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, chamfer_length: 0.020 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES SHANK END. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-050-5446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

23087585

NSN: 5315-01-050-5446
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)

SPECIFICATIONS

height	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
diameter	0.121 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
material	STEEL COMP 1095 OVERALL
head_width	0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
chamfer_length	0.020 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES SHANK END
hardness_rating	36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
style_designator	STRAIGHT
pin_chamfer_angle	45.0 DEGREES NOMINAL
under_head_length	0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
material_document_and_classification	AMS 5132 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5315-01-050-5446

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES SHANK END

•

CHAMFER LENGTH: 0.020 INCHES NOMINAL IN

•

HEAD WIDTH: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN

•

UNDER HEAD LENGTH: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL

•

HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES SHANK END
SURFACE FINISH	63.0 MICROINCHES HEAD OUTSIDE DIAMETER
SURFACE FINISH	63.0 MICROINCHES BOTH ENDS
CHAMFER LENGTH	0.020 INCHES NOMINAL IN
HEAD WIDTH	0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
UNDER HEAD LENGTH	0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	45.0 DEGREES NOMINAL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	STRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5132 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

6886436Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 23087585?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 23087585?

23087585 is a PIN,STRAIGHT,HEADED.

What parts can replace 23087585?

There is 1 known substitute for 23087585: 6886436. Substitute compatibility should be verified for your specific system.

What is the NSN for 23087585?

23087585 is cataloged in the U.S. Government catalog under NSN 5315-01-050-5446. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

23087585 — PIN,STRAIGHT,HEADED

Request a Quote — 23087585