PartsTable
Technical Data Sheet
Download PDF

23076139 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

23076139: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, nut_style: SPLINE DRIVE, thread_class: 3B, nut_thickness: 1.129 INCHES MINIMUM AND 1.133 INCHES MAXIMUM IN, thread_series: UNS, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-527-3417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23076139
NSN: 5310-01-527-3417
FSC: 5310 — Nuts and Washers
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
nut_styleSPLINE DRIVE
thread_class3B
nut_thickness1.129 INCHES MINIMUM AND 1.133 INCHES MAXIMUM IN
thread_seriesUNS
hardness_rating32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
special_featuresPLATE WITH TUNGSTEN CARBIDE 17% COBALT AREA PER EPS 10414, PLATING TO BE 0.004-0.006 THICK
thread_directionRIGHT-HAND
nominal_thread_size4.906 INCHES IN
drive_point_quantity170
end_item_identificationT56 ENGINE
thread_quantity_per_inch12
NSN5310-01-527-3417
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 23076139 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 4.906 INCHES IN
•
NUT THICKNESS: 1.129 INCHES MINIMUM AND 1.133 INCHES MAXIMUM IN
•
DRIVE POINT QUANTITY: 170
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE4.906 INCHES IN
NUT THICKNESS1.129 INCHES MINIMUM AND 1.133 INCHES MAXIMUM IN
SPECIAL FEATURESPLATE WITH TUNGSTEN CARBIDE 17% COBALT AREA PER EPS 10414, PLATING TO BE 0.004-0.006 THICK
DRIVE POINT QUANTITY170
PART NAME ASSIGNED BY CONTROLLING AGENCYPROP, SHAFT T-NUT
NUT STYLESPLINE DRIVE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23076139?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23076139?
23076139 is a NUT,PLAIN,ROUND.
What is the NSN for 23076139?
23076139 is cataloged in the U.S. Government catalog under NSN 5310-01-527-3417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23076139