PartsTable
Technical Data Sheet
Download PDF

23064-1370 — PLATE,RETAINING,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

23064-1370: PLATE,RETAINING,BEARING.

The PLATE,RETAINING,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN, aperture_diameter: 1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, mounting_hole_type: ROUND, UNTHREADED, mounting_hole_diameter: 0.204 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-890-7772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23064-1370
NSN: 3110-00-890-7772
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3CPE0 — SAFRAN POWER USA LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
aperture_diameter1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
mounting_hole_typeROUND, UNTHREADED
mounting_hole_diameter0.204 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
bolt_circle_hole_quantity4
NSN3110-00-890-7772
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 23064-1370 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE HOLE QUANTITY: 4
•
MOUNTING HOLE TYPE: ROUND, UNTHREADED
•
MOUNTING HOLE DIAMETER: 0.204 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
BOLT CIRCLE HOLE QUANTITY4
MOUNTING HOLE TYPEROUND, UNTHREADED
MOUNTING HOLE DIAMETER0.204 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
APERTURE DIAMETER1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 23064-1370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23064-1370?
23064-1370 is a PLATE,RETAINING,BEARING.
What is the NSN for 23064-1370?
23064-1370 is cataloged in the U.S. Government catalog under NSN 3110-00-890-7772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23064-1370